Items where Year is 2019

Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | F | G | I | J | K | L | M | N | P | R | S | T | V | Y | Z
Number of items: 67.

A

A. Chinnamahammad, Bhasha and Balamurugan, K (2019) Fabrication and property evaluation of Al 6061+x% (RHA+TiC) hybrid metal matrix composite. SN Applied Sciences, 1 (977). ISSN 2523-3971

Adarsha Kumar, Kaladari and Ratnam, Chanamala and Venkata Rao, K and Murthy, B. S. N (2019) Experimental studies of machining parameters on surface roughness, flank wear, cutting forces and work piece vibration in boring of AISI 4340 steels: modeling and optimization approach. SN Applied Sciences, 1 (26). ISSN 2523-3971

Ambati, R.R. and Gogisetty, D and Aswathanarayana, R.G and Ravi Chandra, Sekhara Reddy Danduga and Bikkina, P.N and Bo, L and Yuepeng, S (2019) Industrial potential of carotenoid pigments from microalgae: Current trends and future prospects. Critical Reviews in Food Science and Nutrition, 59 (12). pp. 1880-1902. ISSN 1549-7852

Anandarup, Goswami and Manoj B, Gawande (2019) Phosphorene: Current status, challenges and opportunities. Frontiers of Chemical Science and Engineering, 13. pp. 296-309. ISSN 20950179, 20950187

Anupkumar, T and Praveen Reddya, A and Noble, Sharmaa and Narayan Rao, N and Srinivasa Rao, B (2019) Semi-analytical Evaluation of Entropy Generation in 1-D Heat Conduction with Variable Thermal Conductivity. International Journal of Vehicle Structures & Systems, 11 (4). pp. 443-446. ISSN 0975-3060

Arulkumar, S and Parthiban, S and Anandarup, Goswami and Rajender S, Varma and Mu, Naushad and Manoj B, Gawande (2019) Low temperature processed titanium oxide thin-film using scalable wire�bar coating. Materials Research Express, 6 (12). p. 126427. ISSN 20531591

B

B. Nageswara, Rao and N., Satyanarayana (2019) Surface modified LiCoO2 as cathode for Li Ion battery application. Materials today: Proceedings, 19. pp. 2654-2657. ISSN 2214-7853

Balamurugan, K and Uthayakumar, M and Ramakrishna, M and Pillai, U. T. S (2019) Air Jet Erosion Studies on Mg/SiC Composite. Silicon. pp. 413-423. ISSN 1876-990X

Balamurugan, K and Uthayakumar, M and Sankar, S and Hareesh, U.S and Warrier, K.G.K (2019) Predicting correlations in abrasive waterjet cutting parameters of Lanthanum phosphate/Yttria composite by response surface methodology. Measurement, 131. pp. 309-318. ISSN 1873-412X

Balamurugan, K and Uthayakumar, M and Thirumalai Kumaran, S and Samy, G.S and Pillai, U.T.S (2019) Drilling study on lightweight structural Mg/SiC composite for defence applications. Defence Technology, 15. pp. 557-564. ISSN 2214-9147

Bangaraiah, P and Sarathbabu, B (2019) OPTIMIZATION OF PROCESS PARAMETERS IN REMOVAL OF LEAD FROM AQUEOUS SOLUTION THROUGH RESPONSE SURFACE METHODOLOGY. Chemical Engineering Communications. pp. 986-993.

Bhavya Swathi, I and Suvarna Raju, L and Perumalla Janaki, Ramulu (2019) Surface development by reinforcing nano-composites during friction stir processing – a review. Journal of Engineering, Design and Technology, 18 (3). pp. 653-687. ISSN 1726-0531

Boddupally, Srinivas and Jyothi, Prashanth and Rao, Mandava Venkata Basaveswara and Rao, Koya Prabhakara (2019) Design and Synthesis of Antimicrobial Active ( E )‐(3‐(Substituted‐styryl)‐7 H ‐furo[2,3‐ f ]chromen‐2‐ yl )(phenyl)methanone Derivatives and Their In Silico Molecular Docking Studies. Journal of Heterocyclic Chemistry, 56 (1). pp. 73-80. ISSN 0022-152X

C

CHIMAKURTHY, J and MURTHY, T. E. G. K and DIWAN, P. V (2019) Relationship between Dopamine and Serotonin on the Effect of Ginkgo biloba Extract in the Treatment of Obsessive-compulsive Disorder in Rodents. Indian Journal of Pharmaceutical Sciences, 81 (3). pp. 431-437. ISSN 0250474X, 19983743

D

Deepth, T and Balamurugan, K (2019) Effect of Yttrium (20%) doping on mechanical properties of rare earth nano lanthanum phosphate (LaPO4 ) synthesized by aqueous sol-gel process,. Ceramic International, 45 (15). pp. 18229-18235. ISSN 1873-3956

Devaraju, S and Krishnadevi, K and Naveena, E and Alagar, M (2019) Design and development of polybenzoxazine-POSS hybrid materials from renewable starting materials for low k and low surface free energy applications. Materials Research Express, 6 (10). ISSN 2053-1591

Devaraju, S and Krishnadevi, K and Naveena, E and Alagar, M (2019) Design and development of polybenzoxazine�POSS hybrid materials from renewable starting materials for low k and low surface free energy applications. Materials Research Express, 6 (10). ISSN 2053-1591

Devaraju, S and Krishnadevi, K and Sriharshitha, S and Alagar, M (2019) Design and Development of Environmentally Friendly Polybenzoxazine–Silica Hybrid from Renewable Bio-resource. Journal of Polymer and the Environment, 27. pp. 141-147. ISSN 1566-2543

Devi, Eeduri R. and Sreenivasulu, Reddymasu and Rao, Koya P. and Nadh, Ratnakaram V. and Sireesha, Malladi (2019) Novel 1,3,4-Thiadiazole Linked Amide Derivatives of Pteridone: Synthesis and Study of Anticancer Activities. Letters in Organic Chemistry, 17 (1). pp. 54-60. ISSN 15701786

F

F, Bellarmine and E Senthil, Kumar and Ramanjaneyulu, Mannam and MS Ramachandra, Rao (2019) Observation of ultraviolet whispering gallery modes in ZnMgO microrods. Journal of Luminescence, 210. pp. 404-407. ISSN 1872-7883

G

Garg, S and Ghosh, P and Rana, S. S and Pradhan, R. C (2019) Preparation and quality evaluation of nutritionally enriched jam made from blends of Indian blackberry and other fruits. International Journal of Fruit Science, 19 (1). pp. 29-44. ISSN 1553-8621

Gayatri, Uppalapati and Srinivasarao, Gunji and Ramakrishna, Malkapuram (2019) Development and characterization of chicken feather rachis, sawdust and HDPE hybrid composite material. Revue des composites et des matériaux avancés, 28 (4). pp. 509-528. ISSN 1958-5799

Ghosh, P and Garg, S and Mohanty, I and Sahoo, D and Pradhan, R. C (2019) Comparison and storage study of ultra-filtered clarified jamun (Syzygium cumini) juice. Journal of food science and technology,, 56. pp. 1877-1889. ISSN 0022-1155

Govardhana Rao, Chilukoti and Venkatesh, B and Sai Chandana, V (2019) Optimisation of Dyeing and Mordanting Parameters on Cotton Fabrics Treated With Allium Cepa as a Natural Dye Source. Journal of the Textile Association, 79 (5). pp. 333-339.

Gurmeet, Singh and Anil Kumar, T.Ch and Naikan, V.N.A (2019) Efficiency monitoring as a strategy for cost effective maintenance of induction motors for minimizing carbon emission and energy consumption. Reliability Engineering and System Safety, 184. pp. 193-201. ISSN 1879-0836

I

Indukuri, C.S.R and Nerella, R and Madduru, S.R.C. (2019) Effect of graphene oxide on microstructure and strengthened properties of fly ash and silica fume based cement composites. Construction and Building Materials, 229. ISSN 1879-0526

J

Jagadish Kumar, Siva and Venkatesh, B and Govardhana Rao, Ch and Ramesh Naidu, M (2019) Cotton Fabrics Treatment With Gallnut Extract (Terminalia Chebula) For Improving Color Fastness Of Alizarin Dye. International Journal of Recent Technology and Engineering (IJRTE), 8 (4). pp. 1520-1523. ISSN 2277-3878

K

K Thanigai, Arul and M, Ramanjaneyulu and MS Ramachandra, Rao (2019) Energy harvesting of PZT/PMMA composite flexible films. Current Applied Physics, 19 (4). pp. 375-380. ISSN 1878-1675

Krishnadevi, Krishnamoorthy and Devaraju, Subramani and Naveena, Eeda (2019) Development and characterization of fully bio‐based polybenzoxazine‐silica hybrid composites for low‐k and flame‐retardant applications. Polymers for Advanced Technologies, 30 (1). pp. 1856-1864. ISSN 1099-1581

L

Latchoumi, T.P and Balamurugan, K and Dinesh, K and Ezhilarasi, T.P (2019) Particle Swarm Optimization approach for waterjet cavitation peening. Measurement, 141. pp. 184-189. ISSN 1873-412X

Latchoumi, T.P and Ezhilarasi, T.P and Balamurugan, K (2019) Bio-inspired Weighed Quantum Particle Swarm Optimization and Smooth Support Vector Machine ensembles for identification of abnormalities in medical data,. SN Applied Sciences, 1 (1137). pp. 1-12. ISSN 2523-3971

Leung, H.M and Duzgoren-Aydin, N.S and Au, C.K and Krupanidhi, S and Fung, K.Y and Cheung, K.C and Wong, Y.K and Peng, X.L and Ye, Z.H and Yung, K.K.L and Tsui, M.T.K (2019) Monitoring and assessment of heavy metal contamination in a constructed wetland in Shaoguan (Guangdong Province, China): bioaccumulation of Pb, Zn, Cu and Cd in aquatic and terrestrial components. Differential Equations and Dynamical Systems, 27 (13). pp. 1-22. ISSN 0974-6870

Lokesh, Madineni and Ravi Chandra Charyulu, K and Harish Babu, B and Ayyana, K and Ashok, Chakravarthy (2019) Experimental analysis of Moringa leaf thin layer drying modeling. Journal of Pharmacognosy and Phytochemistry, 8 (6). pp. 697-701. ISSN 2278-4136

M

Murthy, P.B.G.S.N and Sreenivasa Rao, Ch and Venkata Rao, K (2019) Experimental and 3D FEM-ANN based analysis and prediction of cutting forces, tool vibration and tool wear in boring of TI-6AL-4V alloy. International Journal of Automotive and Mechanical Engineering, 16 (1). pp. 6146-6160. ISSN 2180-1606

N

Nagamani, M and Vimal Babu., U and Ramakrishana., M and Sandeep, Kumar (2019) Manipulation of Electronic Devices and Data in Dispensing Pumps. International Journal of Innovative Technology and Exploring Engineering, 8 (11). ISSN 2278-3075

Nagaraju, M and Anil Kumar, S and Reddy, P.S and Kumar, A and Manohar Rao, D and Rao, D., (2019) Genome-scale identification, classification, and tissue specific expression analysis of late embryogenesis abundant (LEA) genes under abiotic stress conditions in Sorghum bicolor L. PLoS ONE, 14 (1). pp. 1-27. ISSN 1932-6203

Nandure, Narayan Rao and Pavuluri, M. V. Rao (2019) First Ply Failure Analysis of Rectangular Fiber Metal Laminated Composite Plates Subjected to Uniformly Distributed Loads. Journal of Failure Analysis and Prevention, 19 (6). pp. 1683-1689. ISSN 1547-7029

P

Phaneendra Kumar, K and Vengal Rao, K and Venkata Ravishankar, DA and Bhaskara Rao, P (2019) Determination of flow front velocity and optimal injection pressures for better impregnation of E-glass with polyester in resin transfer mold,. INCAS BULLETIN, 11 (3). pp. 87-98. ISSN 2247-4528

Prabhakara Rao, Koya (2019) Coordination preferred open metal sites containing porous coordination polymers for selective gas/solvent adsorption. Materials Today: Proceedings, 19. pp. 2604-2608. ISSN 22147853

Pravat Kumar, Behera and Ravi Kumar, Mandava and Pandu R, Vundavilli (2019) Push Recovery System and Balancing of a Biped Robot on Steadily Increasing Slope of an Inclined Plane. International Journal of Computational Vision and Robotics, Inderscience, 9 (1). pp. 70-89. ISSN 1752-914X

R

Raj, B. K and Jyothi, Y and Kanasani, P and Siva Gangadhar, D (2019) The best suitable alternative to diesel in a compression ignition engine between waste plastic oil and waste tire oil blends with diesel. Energy sources, Part A: recovery, utilization, and environmental effects, 42 (22). pp. 2731-2741. ISSN 1556-7230

Raju, M.V and Neelakanta Rao, L and Mariadas, K and Siva Jagadish Kumar, M and Ramesh Babu, S (2019) A STUDY ON METALS RECOVERY FROM THE WASTE WATER EFFLUENTS IN ELECTROPLATING INDUSTRY. International Journal of Civil Engineering and Technology (IJCIET), 10 (2). pp. 1020-1040. ISSN 0976-6308

Ramu, Samineni and Jithendra, Chimakurthy and Sumalatha, K and Dharani, G and Rachana, J and Manasa, K and Anitha, P (2019) Co-Crystals: A Review of Recent Trends in Co Crystallization of BCS Class II Drugs. Research Journal of Pharmacy and Technology, 12 (7). pp. 3117-3124. ISSN 09743618, 0974360X

Rana, S. S and Pradhan, R. C and Mishra, S (2019) Image analysis to quantify the browning in fresh cut tender jackfruit slices. Food chemistry, 278. pp. 185-189. ISSN 0308-8146

Ratnam, Chanamala and Nerella Mary, Jasmin and Rao Vana, Vital and Rao K., Venkata (2019) Acoustic emission signature analysis on rolling element bearings due to localized defects. International Journal of Modern Manufacturing Technologies,, 9 (1). ISSN 2067–3604

Ravi Kumar, Mandava and Pandu R., Vundavilli (2019) An adaptive PID control algorithm for the two-legged robot walking on a slope. Neural computing and Applications, 32. pp. 3407-3421. ISSN 0941-0643

Reddy Chirra, V.R and Uyyala, S.R. and Kishore Kolli, V.K. (2019) Deep CNN: A machine learning approach for driver drowsiness detection based on eye state. Revue d'Intelligence Artificielle, 33 (6). pp. 461-466. ISSN 1958-5748

S

Sajja, T.K and Devarapalli, R.M and Kalluri, H.K. (2019) Lung cancer detection based on CT scan images by using deep transfer learning. Traitement du Signal, 36 (4). pp. 339-344. ISSN 1958-5608

Selvaraj, V and Rhagavarshini, T. R and Krishnadevi, K (2019) An escalation of anticorrosion and microelectrical properties of polyurethane nanocomposites from green Brassica nigra oil. Polymer Bulletin, 76 (1). pp. 469-494. ISSN 0170-0839

Selvi, M and Devaraju, S and Alagar, M (2019) Cyclotriphosphazene nanofber‑reinforced polybenzoxazine/epoxy nanocomposites for low dielectric and fame‑retardant applications. Polymer Bulletin, 76 (7). pp. 3785-3801. ISSN " 0170-0839"

Shajeeya Amren, Shaik and Anandarup, Goswami and Rajender S, Varma and Manoj B, Gawande (2019) Nitrogen-doped Nanocarbons (NNCs): Current Status and Future Opportunities. Current Opinion in Green and Sustainable Chemistry, 15. pp. 67-76. ISSN 24522236

Sumalatha, Boddu and John Babu, Dulla and Venkata Narayana, Alugunulla and A. Khan, Anoar (2019) An assessment on removal performance of Arsenic with treated Turbinaria vulgaris as an adsorbent: characterization, optimization, isotherm and kinetics study. Environmental Progress, 39. pp. 1-32.

T

Thirumala Vasu, Aradhyula and Da, Bian and Babul Reddy, A and Yeau-Ren, Jeng and Murthy, Chavali and Sadiku, E. R and Ramakrishna, Malkapuram (2019) Compounding and the mechanical properties of catla fish scales reinforced-polypropylene composite–from biowaste to biomaterial. Advanced Composite Materials, 29. pp. 115-128. ISSN 1568-5519

Tummapudi, Nagamalleswari and Jaladi Nitchal, Kiran and Modem, Sreenivasulu and Konapala Sambasiva, Rao and Kurapati Srinivasa, Rao and Sangula, Nagamani (2019) Study Of Structural And Mechanical Aspects Of Praseodymium And Europium Doped SrBi2Nb2O9 Ceramics. Materials TodayProceedings, 19. pp. 2658-2662. ISSN 2214-7853

V

V., Malapati and R., Singh (2019) Effect of thickness on structure and optical properties of Zn0.9Co0.1Oδ thin films deposited by magnetron sputtering in oxygen gas environment. Materials Today: Proceedings, 19. ISSN 2214-7853

Vaseem Chavan, Md and Subrata, Ghosh and Ramesh Naidu, M (2019) An elliptical model for lockstitch 301 seam to estimate thread consumption. The Journal of The Textile Institute, 110 (12). pp. 1740-1746. ISSN 0040-5000

Vaseem Chavhan, Md and Ramesh Naidu, M (2019) Investigating the Properties of Wet-Laid Nonwoven Made from Mechanically Fibrillated Jute Fiber. Journal of Natural Fibers, 18 (1). pp. 34-41. ISSN 1544-046X

Venkata Rao, K (2019) A Novel Approach for Minimization of Tool Vibration and Surface Roughness in Orthogonal Turn Milling of Silicon Bronze Alloy. Silicon. ISSN 1876-990X

Venkata Rao, K (2019) Power consumption optimization strategy in micro ball-end milling of D2 steel via TLBO coupled with 3D FEM simulation. Measurement, 132. pp. 68-78. ISSN 1873-412X

Venkata Rao, K (2019) A study on performance characteristics and multi response optimization of process parameters to maximize performance of micro milling for Ti-6Al-4V. Journal of Alloys and Compounds. pp. 773-782. ISSN 0925-8388

Venkata Rao, K and Harish Babu, B and Umasai Vara Prasad, V (2019) A study on effect of dead metal zone on tool vibration, cutting and thrust forces in micro milling of Inconel 718. Journal of Alloys and Compounds, 793. pp. 343-351. ISSN 1873-4669

Venkataiah, M and Anup Kumar, T and VenkataRao, K and Anand Kumar, S and Siva, I and Ratna Sunil, B (2019) Effect of grain refinement on corrosion rate, mechanical and machining behaviorof friction stir processed ZE41 Mg alloy,. Transactions of the Indian Institute of Metals, 72 (1). pp. 123-132. ISSN 0972-2815

Venkataiah, M and Anup Kumar, T and VenkataRao, K and Anand Kumar, S and Siva, I and Ratna Sunil, B (2019) Role of Friction Stir Processing Parameters on the Microstructure and Hardness of ZE41 Mg Alloy: A Taguchi Approach,. Silicon. ISSN 1876-990X

Venkatarao, K and Anup Kumar, T (2019) An experimental parametric analysis on performance characteristics in wire EDM of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233 (14). pp. 4836-4849. ISSN 2041-2983

Venkatesh, B and Govardhanrao, Ch and Vaseem Chavhan, Md and Siva Jagadish Kumar, M (2019) Kinetics of Reactive Dyed Pretreated Cotton Fabrics With and without using Salt. International Journal of Recent Technology and Engineering (IJRTE), 8 (4). pp. 9723-9726. ISSN 2277-3878

Y

Yarlagaddaa, Jyothhi and Ramakrishna, M (2019) Fabrication and characterization of S glass hybrid composites for Tie rods of aircraft. Materials Today: Proceedings, 19. pp. 2622-2626. ISSN 22147853

Z

Zhou, L and Kamyab, H and Surendar, A and Maseleno, A and Ibatova, A.Z and Chelliapan, S and Karachi, N and Parsaee, Z. (2019) Novel Z-scheme composite Ag2CrO4/NG/polyimide as high performance nano catalyst for photoreduction of CO2: Design, fabrication, characterization and mechanism. Journal of Photochemistry and Photobiology A: Chemistry, 368. pp. 30-40. ISSN 1873-2666

This list was generated on Sat Dec 7 10:45:44 2024 UTC.