Optimization of dead metal zone to reduce cutting forces in micro milling of Inconel 718 using RSM

This study focuses on the mechanism of DMZ (dead metal zone) creation, as well as the impact of cutting edge geometries (sharp, chamfered, double chamfered, and blunt edges), cutting speed, and coefficient of friction on DMZ formation while milling Inconel 718 material (FEM). A non-contact type sensor called a laser doppler vibrometer (LDV) is used to monitor the vibration of rotating surfaces. In current research work, the LDV is used to measure the mill cutter vibration in micro-milling of Inconel 718 in terms of acoustic optic emission signals. A FFT (fast fourier transformer) is used for signals processing in to frequency domain. Design of experiments as per Taguchi, experiments were performed on the alloy at three levels of spindle speeds, depth of cuts, feed rates. Experimental results on the amplitude o vibration of tool along X and Y directions, surface roughness were measured and analysed using response surface methodology. Analysis obtained from the variance was used to recognize the significant parameters which effect the vibration of tool and roughness of surface. RSM was implemented and optimized process parameters for the minimum vibration amplitude and surface roughness