Items where Year is 2020

A

Anandarup, Goswamia and Ravishankar, G and Kadama, A and Tuceka, Jiri and Zdenek, Sofer and Daniel, Bousac and Rajender, S and Varmaa, A and Manoj, B and Gawandea, D and Radek, Zborila (2020) Fe(0)-embedded thermally reduced graphene oxide as efficient nanocatalyst for reduction of nitro compounds to amines. Chemical Engineering Journal, 382. p. 122469. ISSN 13858947

Anoar, Ali Khan and Shraboni, Mukherjee and Madhumanti, Mondal and Sumalatha, Boddu (2020) Assessment of algal biomass towards removal of Cr (VI) from tannery effluent: A sustainable approach. Environmental Science and Pollution Research, 29. pp. 61856-61869.

Arulkumar, S and Senthilkumar, T and Parthiban, S and Gnanaprakash, Dharmalingam and Anandarup, Goswami and Saad M, Alshehri and Manoj B, Gawande (2020) Synthesis and structural characterization of the formato bridged Cu( ii ) cubane: Crystallographic evidence of atmospheric CO 2 fixation as formate in a tertranuclear Cu(II) cluster. Journal of Molecular Structure, 1219. p. 129064. ISSN 222860

Ashok Kumar, Popuri (2020) Design Parameters for Diesel Hydro Desulfurization (DHDS). Research Journal of Pharmacy and Technology, 13 (5). ISSN 0974-3618

Ashok Kumar, Popuri (2020) Efficiency of Antiscalants in Industrial Cooling Water Systems. Research Journal of Pharmacy and Technology, 12 (1). ISSN 0974-3618

B

B, Srinivas and Koya, Prabhakara Rao (2020) Design an efficient method for the synthesis of 2-(1,3-diphenyl-1H-pyrazol-4-yl)-1H-benzo[d]imidazole. Mapana Journal of Sciences, 19 (2). pp. 21-31. ISSN 0975-3303

B. J. M., Rao and K.V. N. S., Rao (2020) CFD Studies Of Mixing Behavior Of Inert Sand With Biomass In Fluidized Bed. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 597-607. ISSN 2454 -7190

B. Nagaeswara, Rao and Juluru Pavanu, Sai (2020) Heat Transfer Enhancement Of A Triplex Concentric Tube During Energy Storage By Using Pcm. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 559-565. ISSN 2454 -7190

B. Nageswara, Rao and D., Narsimulu and V.Madhusudhan, Rao and N., Satyanarayana (2020) Structural and electrochemical studies of La2O3 coated LiCoO2 particles. Transactions of Indian ceramic society, 79. pp. 120-124. ISSN 2165-5456

B. Nageswara, Rao and K. Pavan Kumar, Reddy and M. Srinivasa, Reddy and T., Sreedhar (2020) Analyzing The Thermal Performance Of A Pcm Material Utilized In Buildings. Journal of Mechanics of Continua and Mathematical Sciences (15): 7. pp. 551-558. ISSN 2454 -7190

B.Nageswara, Rao and J Pavanu, sai (2020) Efficiency and economic optimization of shell and tube heat exchanger using bacteria foraging algorithm. SN Applied Sciences, 2 (13). ISSN 2523-3971

Babu, N.L.A. Amara and Srinivas, B. and Sreeram, V. and Rao, Koya Prabhakara (2020) Development and Validation for Simultaneous Estimation of Perindopril and Indapamide by UPLC-UV in Tablet Dosage form. Research Journal of Pharmacy and Technology, 13 (1). p. 287. ISSN 0974-3618

Balamurugan, K and Arunkarthikeyan, K and Rao, P.M.V (2020) Studies on cryogenically treated WC-Co insert at different soaking conditions. Materials and Manufacturing Processes, 35 (5). pp. 545-555.

Bellum, R.R and Muniraj, K and Indukuri, C.S.R and Madduru, S.R.C (2020) Investigation on Performance Enhancement of Fly ash-GGBFS Based Graphene Geopolymer Concrete. Journal of Building Engineering, 32. ISSN 2352-7102

Bhavya Swathi, I and Suvarna Raju, L and Perumalla Janaki, Ramulu (2020) Surface development by reinforcing nano-composites during friction stir processing – a review. Journal of Engineering, Design and Technology, 18 (3). pp. 653-687. ISSN 1726-0531

Borigorla, Venu and L Suvarna, Raju and K Venkata, Rao (2020) Multiobjective optimization of friction stir weldments of AA2014-T651 by teaching–learning-based optimization. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234 (6). pp. 1146-1155. ISSN 2041-2983

D

D, Satyanarayana and Sriramireddy., K and P.S.R., Gopalasetti and Ravikumar, Mandava (2020) Reduction In Emission Of Harmful Gases From Ic Engine By Electrolysis. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 566-577. ISSN 2454 -7190

D., Narsimulu and B. Nageswara, Rao and G., Nagaraju and S. Y., Jae and N., Satyanarayana (2020) Enhanced energy storage performance of nanocrystalline Sm- doped CoFe2O4 as an effective anode material for Li-ion battery applications. Journal of solid state electrochemistry, 24. pp. 225-236. ISSN 1433-0768

D., Narsimulu and N., Naresh and B. Nageswara, Rao and N., Satyanarayana (2020) Rational design of SnO2 nanoflakes as a stable and high rate anode for lithium-ion batteries. Journal of materials science: Materials in electronics, 31. pp. 8556-8563. ISSN 1573-482X

D. Brahmeswara, Rao and M., Balaji and P.B.G.S.N., Murthy and K. Venkata, Rao (2020) An Optimization Strategy To Reduce Surface Roughness, Flank Wear And Tool Vibration In Micro Milling Of TI-6AL-4V Alloy. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 529-539. ISSN 2454 -7190

D. Vinay, Kumar and G. Samhita, Priyadarsini and V. Jagadeesh, Babu and Y. Sai Varun, Teja (2020) Performance And Emission Characteristics Of Gasoline-Ethanol Blends On Pfi-Si Engine. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 578-586. ISSN 2454 -7190

Devaraju, S and Krishnadevi, K and Naveena, E and Alagar, M (2020) Eco‑friendly fully bio‑based polybenzoxazine‑silica hybrid materials by sol–gel approach. Polymer Bulletin, 78. pp. 4251-4260. ISSN 0170-0839

DhanaRaju, V and Harish, Venu and Lingesan, Subramani and P.S., Kishored and L., Prasanna and D. Vinay, Kumare (2020) An experimental assessment of prospective oxygenated additives on the diverse characteristics of diesel engine powered with waste tamarind biodiesel. Energy, 203. p. 117821. ISSN 1873-6785

Divya, Ch and Suvarna, Raju and Singaravel., B (2020) Effect Of Various Solid Lubricants On Surface Quality In Turning Of Inconel 718. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 49-506. ISSN 2454 -7190

Divya, P and Arulkumar, S and Parthiban, S and Anandarup, Goswami and Tansir, Ahamad and Manoj B., Gawande (2020) "Rapid and ScalableWire-bar Strategy for Coating of TiO2 Thin-films: E ect of Post-Annealing Temperatures on Structures and Catalytic Dye-Degradation". Gawande, 25 (7). p. 1683. ISSN 14203049

E

E. Siva, Krishna and Gamini, Suresh and M, Nagarjuna (2020) A Literature Review on the Extensive Study of Multi-functional Self-healing Polymer Composites (SHPC). Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 648-660. ISSN 2454 -7190

F

Farooq, Sk and D. Vinay, Kumar (2020) Experimental Evaluation of AN SI Engine Using E10 Equialent Ternary Gasoline-Alchohol Blends. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 638-647. ISSN 2454 -7190

G

GAYATRI, U and G Srinivasa, Rao and M, Ramakrishna (2020) Mechanical and thermal characterization of chickenRaches/sawdust reinforced hdpe hybrid composites. International Journal of Mechanical and Production Engineering Research and Development, 10 (1). pp. 327-344. ISSN 2249–8001

Gamini, Suresh and Emani. Siva, Krishna (2020) Influence Of Nano Clay On Mechanical And Morphological Properties Of Sisal/Banana Fiber Reinforced Composites. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 443-452. ISSN 2454 -7190

Gamini, Suresh and K. Balakrishna, Reddy and M., Nagarjuna (2020) Simulation Of Shank-Foot 2-Dof Manipulator With Computed Torque Control For Trajectory Generation. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 416-425. ISSN 2454 -7190

Gamini, Suresh and Lakshmi Srinivas, Ch and M Chandra, Sekha (2020) Investigation of the effect of micro-fillers on Viscoelastic and Erosion wear Characteristics of PTFE composites. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 696-703. ISSN 2454 -7190

Gamini, Suresh and Nagarjuna, Maguluri and Kunchala, Balakrishna (2020) Characterization Of Materials For Customized Afo Using Additive Manufacturing. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 587-596. ISSN 2454 -7190

Ganapathi Rao, Kandregula and Sudip, Mandal and Prince, Gollapalli and Satyesh, Yadav and Kothandaraman, Ramanujam (2020) A computational study on boron dipyromethene ancillary acceptor-based dyes for dye-sensitized solar cells. New Journal of Chemistry, 44. pp. 4577-4886. ISSN 1369-9261

George, H and Deopa, N and Kaur, S and Prasad, A and Sreenivasulu, M. and Jayasimhadri, M and Rao, A.S. (2020) Judd-Ofelt parametrization and radiative analysis of Dy3+ ions doped Sodium Bismuth Strontium Phosphate glasses. Journal of Luminescence, 32. ISSN 1872-7883

Govindarajulu, E and Sai Rakesh, S (2020) Reliability, Availability and Maintainability Analysis for Transportation Vehicles—A Case Study in APSRTC. Advances in Materials and Manufacturing Engineering. Lecture Notes in Mechanical Engineering. pp. 457-467. ISSN 2195-4356

Govindarajulu, Eedara and P. N. Manthru, Naik (2020) Design Optimization of Drive Shaft For An Automobile Application. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 626-637. ISSN 2454 -7190

H

Hepsibah, Palivela and B., Ravali and M.V., Raju and K.Maria, Das and T.Ch.Anil, Kumar (2020) Quality Characteristics of Ground Waters in Few Sources of Industrial Zone. International Journal of Innovative Technology and Exploring Engineering, 9 (3). pp. 1134-1137. ISSN 2278-3075

J

JITHENDRA, CH and SARAVANAN, G and ALAGARSAMY, V and PANNEERSELVAM, T and SELVARAJ, K and PARASURAMAN, P (2020) Synthesis, Characterization & Antimicrobial Activities of New Isoxazole Substituted Mannich and Schiff Bases of 5-Nitroisatin Analogs. Asian Journal of Chemistry, 32 (5). pp. 970-974. ISSN 9707077

Jaladi Nitchal, Kiran and Konapala Sambasiva, Rao and Haileeyesus, Workineh and Potlakayala, Prameela and Kotikala, Sowribabu (2020) Structural, Ferroelectric, Dielectric and Piezoelectric Studies of Yttrium Substituted SrBi2Nb2O9 Lead-free Relaxor Ceramics. Transactions of the Indian Ceramic Society, 79 (4). pp. 202-211. ISSN 2165-5456

Jinka, Ranganayakulu and PV, Srihari and K Venkata, Rao (2020) An optimization strategy to improve performance in electrochemical discharge machining of borosilicate glass using graph theory algorithm and desirability index. Silicon, 14. pp. 5241-5254. ISSN 1876-990X

Jyothhi, Yarlagadda and Dr.Ramakrishna, Malkapuram (2020) Influence of MWCNTs on the MechanicalProperties of Continuous Carbon EpoxyComposites. Journal of Composite and Advanced Materials (RCMA), 30 (1). pp. 35-41. ISSN 1958-5799

K

K., Arunkarthikeyan and A. Chinnamahammad, Bhasha and M. Venkata, pavan and pavan, S and Shaik., Abrar (2020) A Novel Work Table Design For Turning In Abrasive Water Jet Machine. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 453-460. ISSN 2454 -7190

Kishore, P.V.V.N and Jami, A. K and Goswami, A and Tripuramallu, B. K and Kishore, R and Kashanna, J (2020) Synthesis and structural characterization of the formato bridged Cu(II) cubane: Crystallographic evidence of atmospheric CO2 fixation as formate in a tertranuclear Cu(II) cluster, . J. Mol. Struct., 1219. p. 129064. ISSN 0022-2860

Kotha, G and Kolipaula, V.R and Venkata Subba Rao, M and Penki, S and Chamkha, A.J. (2020) Internal heat generation on bioconvection of an MHD nanofluid flow due to gyrotactic microorganisms. European Physical Journal Plus, 135 (7). pp. 1-19. ISSN 2190-5444

Krishnadevi, K and Devaraju, S and Sriharshitha, S and Alagar, M and Keerthi Priya, Y (2020) Environmentally sustainable rice husk ash reinforced cardanol based polybenzoxazine bio-composites for insulation applications. Polymer Bulletin, 77. pp. 2501-2520. ISSN " 0170-0839"

Kurmarayuni, Chandra Mohan and Kurapati, Swarnalatha and Akhil, Syed and Chandu, Basavaiah and Khandapu, Bala Murali Krishna and Koya, Prabhakara Rao and Bollikolla, Hari Babu (2020) Synthesis of multifunctional graphene exhibiting excellent sonochemical dye removal activity, green and regioselective reduction of cinnamaldehyde. Materials Letters, 263. p. 127224. ISSN 0167577X

L

L. Suvarna, Raju and N., Ramakrishna and G., Mallaiah (2020) Effect Of Sic And Tib2 Particles On Microstructure And Mechanical Properties Of Copper Surface Composites Fabricated By Friction Stir Processing. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 507-516. ISSN 2454 -7190

Lam Suvarna, Raju and Venu, Borigorla (2020) Multi Objective Optimization Of Fsw Process Parameters Using Genetic Algorithm And Tlbo Algorithm. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 480-494. ISSN 2454 -7190

M

M Anil, Anil and P Navaneetha, Navaneetha and Reddy, P V Janardhan and Chand, M Prudhvi and Kumar, A Vijay and Kishor, P B Kavi and Rao, K RS Sambasiva and P Rathnagiri, Rathnagiri (2020) Development of Point-of-care Lateral Flow Immunochromatographic Assay for Foot and Mouth Disease Diagnosis. Current Trends in Biotechnology and Pharmacy, 15 (1). pp. 15-21. ISSN 09738916

M. Satish, Kumar and Ambati Dattatreya, Kumar and Hepsibah, Palivela and M. V., Raju and T. Ch. Anil, Kumar (2020) Hydrological Modelling of Catchments at Industrial Sector. International Journal of Engineering and Advanced Technology, 9 (3). pp. 1366-1369. ISSN 2249 – 8958

M. Satish, Kumar and Ambati Dattatreya, Kumar and M. V., Raju and K. Maria, Das and D., Satyanarayana (2020) Exploration of Groundwater Quality to Promote Sustainable Environment. International Journal of Recent Technology and Engineering, 8 (6). pp. 2012-2015. ISSN 2277-3878

M. V., Raju and K. Maria, Das and M. Satish, Kumar and D., Satyanarayana and Cyril Lucy, Monica (2020) Rapid Environmental Impact Assessment of Lake Water. International Journal of Advanced Science and Technology, 29 (3). pp. 8468-8478. ISSN 2005-4238

M.Satish, Kumar and M.V., Raju and K.Maria, Das and T.Ch. Anil, Kumar and D., Satyanarayana (2020) Green Engineering Strategies on Solid Waste Management to Promote Urban Environmental Sustainability. International Journal of Advanced Science and Technology, 29 (5). pp. 4638-4648. ISSN 2005-4238

Mihir, Barman and Gamini, Suresh and Kondeti, Sravanth and Nandure, Narayan Rao (2020) Critical Speed Analysis of Rotor Shafts Using Campbell Diagrams. Journal of Mechanics of Continua and Methamatical Sciences, 15 (7). pp. 675-683. ISSN 2454 -7190

Mihir, Barman and Gamini, Suresh and Kondeti, Sravanth and Nandure Narayan, Rao (2020) Critical Speed Analysis of Rotor Shafts Using Campbell Diagrams. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 675-683. ISSN 2454 -7190

N

N. B. Prakash, Tiruveedula and T.CH. Anil, Kumar and Pagidi, Madhukar and Balasubramanian, Ravisankar and S., Kumaran (2020) Effect of back pressure and temperature on the densification behaviour of Al-Mg alloy. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 684-695. ISSN 2454 -7190

Nagarjuna, Maguluri and Gamini, Suresh and Kunchala, Balakrishna and Emani, Sivakrishna (2020) A Review on the Development of Customized Ankle Foot Orthosis for Foot Drop using Additive Manufacturing Processes. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 661-674. ISSN 2454 -7190

P

P., Sneha and Chinnamahammad, Bhasha and Deepthi., T and Arun, Karthikeyan (2020) A Study On Abrasive Water Jet Machining Using ANOVA On D3 Tool Steel. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 461-471. ISSN 2454 -7190

P. Satish, Kumar and L. Suvarna, Raju and M. Ravi, Kumar and L. Siva Rama, Krishna (2020) A Study Of Hardness And Microstructure Of A Robot Deposited Waam Component With Varying Wire Feed Rate In The Build Direction. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 517-528. ISSN 2454 -7190

Parasuraman, Pavadai and Suresh, Ramalingam and Theivendren, Panneerselvam and Selvaraj, Kunjiappan and Pandurangan, Perumal and Vasudevan, Mani and Govindaraj, Saravanan and Veerachamy, Alagarsamy and Damodar Nayak, Ammunje and Jithendra, Chimakurthy (2020) Synthesis of piperidine-4-one Derivative Containing Dipeptide: An Acetyl cholinesterase and β-secretase Inhibitor. Anti-Infective Agents, 18 (2). pp. 160-168. ISSN 22113533, 22113525

Peele, K.A. and Potla Durthi, C and Srihansa, T and Krupanidhi, S and Ayyagari, V.S and Babu, D.J and Indira, M and Reddy, A.R and Venkateswarulu, T.C (2020) Molecular docking and dynamic simulations for antiviral compounds against SARS-CoV-2: A computational study. Informatics in Medicine Unlocked, 19.

Phaneendra Kumar, Kopparthi and Kiran Kumar Yadav, Aerra and Srikar, Gemaraju and Bhaskara Rao a, Pathakokil and Suresh, Gamini (2020) Tensile And Flexural Properties Of Delaminated Woven E-Glass/Epoxy Composites. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 436-442. ISSN 2454 -7190

Phaneendra Kumar, Kopparthi and Vengal Rao, Kundavarapu and Venkata Ravishankar, Dasari and Venkata Rao, Kaki and Bhaskara Rao, Pathakokila (2020) Modeling of glass fiber reinforced composites for optimal mechanical properties using teaching learning based optimization and artificial neural networks. SN Applied Sciences, 2 (131). ISSN 2523-3971

Priyaranjan, Samal and Ravi Kumar, Mandava and Pandu R., Vundavilli (2020) Dry sliding wear behavior of Al 6082 metal matrix composites reinforced with red mud particles. SN Applied Sciences, 2 (313). ISSN 2523-3971

R

Ramanujan, V and Sadikha, Sk and Sai Pavan Kumar, N. S (2020) Stereoselective synthesis of (-)-Tetrahydropyrenophorol. J. Serb. Chem. Soc., 85 (9). p. 1129. ISSN 2683-3867

Ranakishor, Pelluri and Kongara, Srikanth and Jithendra, Chimakurthy and Rasheed Ahemad, Shaik and Lavanya, R and Vanitha Rani, N (2020) Glycemic and Non-Glycemic Effects of Teneligliptin. Journal of Pharmaceutical Research International, 32 (6). pp. 51-63. ISSN 2456-9119

Rangaraj, V. M and Singh, S and Devaraju, S and Wadi, V. S (2020) Polypropylene/phosphazene nanotube nanocomposites: Thermal, mechanical, and flame retardation studies. Journal of Applied Polymer Science, 137 (46). p. 49525. ISSN 1097-4628

Ratna Raju, Lam and V. V., Kondaiah and Y., Naidubabu and Ravikumar, Dumpala and B.Ratna, Sunil (2020) Effect of Crack Angle on Stress Shielding in Bone and Orthopedic Fixing Plate Implant: Design and Simulation. Advances in Mechanical Engineering, Lecture Notes in Mechanical Engineering, https://doi.org/10.1007/978-981-15-3639-7_94. ISSN 2195-4356

Ravi Krishna Swami, Garigipati and Ramakrishna, Malkapuram (2020) Characterization of novel composites from polybenzoxazine and granite powder. SN Applied Sciences, 2 (1545). ISSN 2523-3971

Ravi Kumar, Mandava and Pandu Vundavilli, R (2020) An adaptive PID control algorithm for the two-legged robot walking on a slope. Neural Computing and Applications, 32. pp. 407-3421. ISSN 1433-3058

S

SATHISH KUMAR, KONIDALA and JITHENDRA, CHIMAKURTHY and VIJAY, KOTRA (2020) RECENT STRATEGIES FOR EFFICIENT SYNTHESIS AND BIOLOGICAL ACTIVITIES OF COUMARIN-CHALCONE DERIVATIVES. Asian journal of pharmaceutical and clinical research, 13 (5). pp. 28-37. ISSN 09742441, 24553891

SATHISH KUMAR, KONIDALA and JITHENDRA, CHIMAKURTHY and VIJAY, KOTRA (2020) RECENT STRATEGIES FOR EFFICIENT SYNTHESIS AND BIOLOGICAL ACTIVITIES OF COUMARIN-CHALCONE DERIVATIVES. Asian Journal of Pharmaceutical and Clinical Research, 13 (5). pp. 28-37. ISSN 0974-2441

SITARAMANJANEYA REDDY, GUNTUR and MIN JOO, CHO (2020) TEMPERATURE DEPENDENCE OF TISSUE THERMAL PARAMETERS SHOULD BE CONSIDERED IN THE THERMAL LESION PREDICTION IN HIGH-INTENSITY FOCUSED ULTRASOUND SURGERY. Ultrasound in Medicine & Biology, 46 (4). pp. 1001-1014. ISSN 0301-5629

Sama, Hanumantha Rao and Kosuri, Sri Venkateswara Kumar and Kalvakolanu, Sripathi (2020) Evaluating and ranking the Indian private sector banks—A multi‐criteria decision‐making approach. Journal of Public Affairs. ISSN 1472-3891

Sathish Kumar, Konidala and Vijay, Kotrab and Ravi Chandra, Sekhara Reddy Danduga and Phani Kumar, Kola (2020) Coumarin-chalcone hybrids targeting insulin receptor: Design, synthesis, anti-diabetic activity, and molecular docking. Bioorganic Chemistry, 104. pp. 1-21. ISSN 0045-2068

Shaik, Feroz and Dhaval Varma, P and M., Ramakrishna (2020) Reverse Engineering: Generation of Cad Model from Scanned Mesh File Captured using 3d Scanner. International Journal of Engineering Research & Technology, 9 (5). pp. 1276-1281. ISSN 2278-0181

Sharif,, S.K and Nageswara, Rao and Jagadish,, D (2020) Comparative performance and emission studies of the CI engine with Nodularia Spumigena microalgae biodiesel versus different vegetable oil derived biodiesel. SN Applied Sciences, 2 (858). ISSN 2523-3971

Shiva Loke, K and Eswar, Pagadala and Devaraju, S and Srinivasadesikan, V and Ravi K., Kottalanka (2020) New zinc complexes derived from “self-adaptable” acyclic diiminodipyrromethanes as potent catalysts for the reduction of curing temperature of bisphenol-A/F benzoxazines. RSC Advances, 10 (60). pp. 36275-36586. ISSN 2046-2069

Siva Jagadish Kumar, M and Ramesh Naidu, M and Hayavadana, J (2020) Effect of Alkaline hydrolysis of jute / polyester union fabric on low stress mechanical properties. Journal of fiber science and technology, 76 (1). pp. 412-421. ISSN 2189-7654

Sivaji, Satrasupalli and Ebenezer, Daniel and Sitaramanjaneya Reddy, Guntur and Shaik, Shehanaz (2020) End to end system for hazy image classification and reconstruction based on mean channel prior using deep learning network. IET Image Processing, 14 (17). pp. 4736-4743. ISSN 1751-9667

Sreerama, Krupanidhi (2020) In silico design of multiepitope vaccine candidate against SARS CoV and CoV2. Vaccine Research, 7 (2). pp. 61-73. ISSN 2383-2819

Sriharshitha, S and Krishnadevi, k and Devaraju, S and Srinivasadesikan, V and Lee, SL (2020) Eco-Friendly Sustainable Poly(benzoxazine-co-urethane) with Room-Temperature-Assisted Self-Healing Based on Supramolecular Interactions. ACS omega, 51. ISSN 2470-1343

Srikar, Gemaraju and Kiran Kumar Yadav, Aerra and Suresh, Gamini and Phaneendra Kumar, Kopparthi and Bhaskara Rao, Pathakokila (2020) A Review On Surface Displacements And Strains Using Digital Image Correlation Techniques. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 426-435. ISSN 2454 -7190

Srinivasa Rao, B and Kurapati, Nagamalleswari and Tummapudi, a and Sreenivasulu, Modem and Nitchal Kiran, Jaladi and Gsvrk, Choudary (2020) Structural, morphological, optical and mechanical studies of annealed ZnO nano particles. Physica B: Physics of Condensed Matter, 597. ISSN 1873-2135

Sriramireddy, K and D., Satyanarayana and Ravikumar, Mandava (2020) An Investigation on Bore-well Rescue Robot–Present Devices and Techniques. International Journal on Emerging Technologies, 11 (1). pp. 358-363. ISSN 2249-3255

Subhojyoti, Sinha and Gourab, Dutta and Ramanjaneyulu, Mannam and Nandita, DasGupta and MS Ramachandra, Rao (2020) Effect of post deposition annealing on the electrical properties of YSZ thin films deposited by pulsed laser technique. Applied Surface Science, 513. ISSN 1873-5584

Sudip, Mandal and Ganapathi Rao, Kandregula and Kothandaraman, Ramanujam (2020) Replacing aromatic π-system with cycloalkyl in triphenylamine dyes to impact intramolecular charge transfer in dyes pertaining to dye-sensitized solar cells application. Journal of Photochemistry and Photobiology A: Chemistry, 403. p. 112862. ISSN 1873-2666

Sujith, Bobba and Leman, Z and Zainudin, E. S and Sapuan, S. M (2020) Low Velocity Impact and Internal Pressure Behaviors of Unaged E-Glass and S-Glass/Epoxy Composite Elbow Pipe Joints. ASCE, 11 (4). pp. 1-10. ISSN 1949-1204

Sujith, Bobba and Sambasiva Rao, Mukkollu and Harish Babu, B and Leman, Z (2020) Effect on the Mechanical Properties of Grey Cast Iron with Variation of Molybdenum and AS – Cast Alloying Elements. Universal Journal of Mechanical Engineering, 8 (6). pp. 298-304. ISSN 2332-3361

T

Thirumala Vasu, Aradhyula and Da, Bian and A. Babul, Reddy and Yeau-Ren, Jeng and Murthy Chavali,, E and Sadiku, R (2020) Compounding and the mechanical properties of catla fish scales reinforced-polypropylene composite–from biowaste to biomaterial. Advanced Composite Materials, 29 (2). pp. 115-128. ISSN 0924-3046

V

V. Uma Sai Vara, Prasad and K. Venkata, Rao and Ch., Nagraju and M., Venu and M., Venkataiah (2020) Experimental Surface Quality Estimation In Ultrasonic Vibration Assisted Helical Milling. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 472-479. ISSN 2454 -7190

V.Uma Sai Vara, Prasad and K.Venkata, Rao and M., Balaji and D.Brahmeswara, Rao (2020) FEA investigation of process parameters effect on machining characteristics in helical milling. Materials Todat: Proceedings, 23 (3). pp. 590-593. ISSN 2214-7853

Vasanthi, P and Prathiba, Jonnala and Ummadi Janardhan, Reddy (2020) Effective Ensemble Strategies for Predicting the Cardiac Diseases. International Journal of Advanced Science and Technology, 29 (8). pp. 1665-1674. ISSN 2005-4238

Venkata Rao, K (2020) The use of teaching-learning based optimization technique for optimizing weld bead geometry as well as power consumption in additive manufacturing. Journal of Cleaner Production, 279. ISSN 1879-1786

VenkataRao, K and Ratna Raju, L and Ch. Kiran, Kumar (2020) Modeling of kerf width and surface roughness in Wire cut EDM of Ti-6Al-4V. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 234 (6). pp. 533-542. ISSN 2041-3009

Vijetha, P and Krishna Jyothi, N and Naga Lakshmi, P and Subbaiah, T (2020) Preparation of Barium Titanate Having High Dielectric Constant from Barite ores using Precipitation, Calcination Techniques. Blue Eyes Intelligence Engineering & Sciences Publication, 8 (4). ISSN 2277-3878 (Submitted)

Vijetha, P and M.Ramesh, Naidu and Satyavathi, B (2020) Irreversible sorption of carbofuran by moderately acidic soil amended with biochar. Biointerface Res Appl Chem, 10 (2). pp. 5224-5228. ISSN 2069-5837

Vijetha, Ponnam and Naresh Kumar, Katari and Ramesh Naidu, Mandapati and Satyasree, Nannapaneni and Subbaiah, Tondepu and Sreekantha, B Jonnalagadda (2020) Efficacy of biochar in removal of organic pesticide, Bentazone from watershed systems. Journal of Environmental Science and Health, Part B, 55 (4). pp. 396-405.

Vishnu, S and Jino Ramson, S.R and Jegan, R (2020) Internet of Medical Things (IoMT)-An overview. ICDCS 2020 - 2020 5th International Conference on Devices, Circuits and Systems. pp. 1-25. ISSN 2470-847X