Items where Year is 2018

A

Anuj K, Rathi and Hana, Kmentová and Alberto, Naldoni and Anandarup, Goswami and Manoj B, Gawande and Rajender S, Varma and Štěpán, Kment and Radek, Zbořil (2018) Significant Enhancement of Photoactivity in One-Dimensional TiO2 Nanorods Modified by S-, N-, O-Doped Carbon Nanosheets. ACS Applied Nano Materials, 1 (6). pp. 2526-2535. ISSN 25740970

Arumugam, H and Krishnan, S and Chavali, M and Muthukaruppan, A. (2018) Cardanol based benzoxazine blends and bio-silica reinforced composites: Thermal and dielectric properties. New Journal of Chemistry, 42 (6). pp. 4067-4080. ISSN 1369-9261

Ashok Kumar, Popuri and Prabhakar, Garimella (2018) Hydrodynamic and Heat Transfer Studies in Riser System for Waste Heat Recovery using Chalcopyrite. Korean Chemical Engineering Research, 56 (2). ISSN 2233-9558

Ashok Reddy, Ankireddy and Rambabu, Gundla and Tuniki, Balaraju and Venkanna, Banothu and Krishna Prasad, Gundla and Uma, Addepally and Jithendra, Chimakurthy (2018) Quinazolin derivatives as emerging alpha-glucosidase inhibitors. European Journal of Chemistry, 9 (4). pp. 322-330. ISSN 10990690, 1434193X

B

B. Nageswara, Rao and D., Narsimulu and E. S., Srinadhu and N., Satyanarayana (2018) Structural, Electrical and Dielectric Properties of Nickel Doped Spinel LiMn2O4 Nanorods. Journal of Ionics, 25. pp. 981-990. ISSN 1862-0760

Balaji, M. and Venkata Rao, K and Mohan Rao, N and Murthy, B.S.N. (2018) Optimization of drilling parameters for drilling of TI-6Al-4V based on surface roughness, flank wear and drill vibration. Measurement: Journal of the International Measurement Confederation, 114. pp. 332-339. ISSN 1873-412X

Balamurugan, K and Uthayakumar, M and Gowthaman, S and Pandurangan, R (2018) A study on the compressive residual stress due to water jet cavitation peening. Engineering Failure Analysis, 92. pp. 268-277. ISSN 1873-1961

Balamurugan, K and Uthayakumar, M and Sankar, S and Hareesh, US and Warrier, KGK (2018) Modeling and surface texturing on surface roughness in machining LaPO4–Y2O3 composite. Materials and Manufacturing Processes, 33 (4). pp. 405-413. ISSN 1042-6914

Brahmeswara Rao, D and Gopala Krishna, A and Venkata Rao, K (2018) Effect of process parameters on surface roughness and amplitude of vibration in micro milling of AISI 304 steel, International. Journal of Mechanical Engineering and Technology, 9 (10). pp. 520-528. ISSN 0976-6359

Brahmeswara Rao, D and Venkatarao, K and Gopala Krishna, A (2018) A hybrid approach to multi response optimization of micro milling process parameters using Taguchi method based graph theory and matrix approach (GTMA) and utility concept,. Measurement, 120. pp. 43-51.

Bujjibabu, G and Chittaranjan Das, V and Ramakrishna, M and Nagarjuna, K (2018) Mechanical And Water Absorption Behavior Of Natural Fibers Reinforced Polypropylene Hybrid Composites. Materials Today: Proceedings, 5. pp. 12249-12256. ISSN 2214-7853

C

Chandru, M and Das, P and Ramos, H. (2018) Numerical treatment of two-parameter singularly perturbed parabolic convection diffusion problems with non-smooth data. Mathematical Methods in the Applied Sciences, 41 (14). pp. 5359-5387. ISSN 1099-1476

D

D., Narsimulu and B. Nageswara, Rao and E. S., Srinadhu and N., Satyanarayana (2018) High capacity electrospun MgFe2O4–C composite nanofibers as an anode material for lithium ion batteries. Chemistry Select, 3 (27). ISSN 2365-6549

Daniel, E. (2018) Optimum Wavelet-Based Homomorphic Medical Image Fusion Using Hybrid Genetic-Grey Wolf Optimization Algorithm. IEEE Sensors Journal, 18 (16). pp. 1-8. ISSN 1530-437X

Dayakar, T, K and Venkateswara, Rao and K., Bikshalu and V., Malapati and Kishore Kumar, Sadasivuni (2018) Non-enzymatic sensing of glucose using a screen-printed electrode modified with novel synthesized CeO2@ CuO core-shell nanostructure. Biosensors and Bioelectronics, 111. ISSN 0956-5663

Dayakar, T. and Rao, K.V and Bikshalu, K and Malapati, V and Sadasivuni, K.K (2018) Non-enzymatic sensing of glucose using screen-printed electrode modified with novel synthesized CeO2@CuO core shell nanostructure. Biosensors and Bioelectronics, 111. pp. 166-173. ISSN 1873-4235

Devaraju, S and Selvi, M and Alagarc, M (2018) Synthesis and characterization of thermally stable and flame retardant hexakis(4- aminophenoxy)cyclotriphosphazene-based polyimide matrices. International Journal of Polymer Analysis and Characterization, 23 (1). pp. 29-37.

Durga Sankar, Vavilapalli and Kavita, Srikanti and Ramanjaneyulu, Mannam and Brajesh, Tiwari and MS Ramachandra, Rao and Shubra, Singh (2018) Photoactive Brownmillerite Multiferroic KBiFe2O5 and Its Potential Application in Sunlight-Driven Photocatalysis. ACS omega, 3 (12). pp. 16643-16650. ISSN 2470-1343

G

Ghosh, P and Pradhan, R. C and Mishra, S and Rout, P. K (2018) Quantification and concentration of anthocyanidin from Indian blackberry (Jamun) by combination of ultra-and nano-filtrations. Food and Bioprocess Technology, 56 (2). pp. 2194-2203. ISSN 19355149, 19355130

Ghosh, P and Pradhan, RC and Mishra, S (2018) Clarification of jamun juice by centrifugation and microfiltration: Analysis of quality parameters, operating conditions, and resistance. Journal of food process engineering, 41 (1). pp. 1-11. ISSN 1745-4530

Gowthaman, S and Balamurugan, K and Manoj Kumar, P and Ahamad Ali, S.K and Mohan, K.L (2018) Electrical Discharge Machining studies on Monel- Super Alloy,. Procedia Manufacturing, 20. pp. 386-391. ISSN 2351-9789

Gurmeet, Singh and Anil Kumar, T. Ch. and Naikan, V. N. A (2018) Speed estimation of rotating machinery using generated harmonics. Computers & Electrical Engineering, 72. pp. 420-430. ISSN 0045-7906

Gurmeet, Singh and T.Ch. Anil, Kumar and V.N.A., Naikan (2018) Efficiency monitoring as a strategy for cost effective maintenance of induction motors for minimizing carbon emission and energy consumption. Reliability Engineering and System Safety. ISSN 0951-8320

Gurumurthy, B R and Ramesh, K P (2018) Application of Scanning Electron Microscopy and Fourier-Transform Infrared Spectroscopy to Study Surface Design and Chemical Group Components of Merino Wool, Paschmina and Angora Fibers. Current Trends in Fashion Technology & Textile engineering, 3 (2). pp. 1-11.

H

Harprabhjot, Singh and Gurvinder Pal Singh, Sodhi and Malkeet, Singh and Nagaraj M., Chelliah and Harpreet, Singh (2018) Study: wear and super hydrophobic behaviour of PTFE-ceria composite. Surface Engineering. ISSN 0267-0844

Hyo‐Jin, Ahn and Anandarup, Goswami and Francesca, Riboni and Stepan, Kment and Alberto, Naldoni and Shiva, Mohajernia and Radek, Zboril and Patrik, Schmuki (2018) Hematite Photoanode with Complex Nanoarchitecture Providing Tunable Gradient Doping and Low Onset Potential for Photoelectrochemical Water Splitting. ChemSusChem, 11 (11). pp. 1873-1879. ISSN 1864564X, 18645631

K

Karlapudi, A.P and Venkateswarulu, T.C and Tammineedi, J and Kanumuri, L and Ravuru, B.K and Dirisala, V.R and Kodali, V.P. (2018) Role of biosurfactants in bioremediation of oil pollution-a review. Petroleum, 4 (3). pp. 241-249. ISSN 2405-5816

Kiran Raj, Bukkarapu and D. Siva, Gangadhar and Jyothi, Y and Prasad, Kanasani (2018) Management, conversion, and utilization of waste plastic as a source of sustainable energy to run automotive: a review. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. ISSN 1556-7036

M

Manoj Kumar, P and Balamurugan, K and Gowthaman, S and Mohammad Ghouse, S and Suryaharshith, K. V (2018) Fractography Analysis and Modeling Studies on Friction Stir Welded AA6061/SiC Composite,. Journal of Advanced Microscopy Research, 13. pp. 1-7. ISSN 2156-7581

Mohan, Selvi and Subramani, Devaraju and Muthukaruppan, Alagar (2018) Synthesis and characterization of thermally stable and flame retardant poly (benzoxazine-co�urethane) matrices. Journal of Macromolecular Science, Part A, 55 (9). pp. 668-675. ISSN 1520-5738

N

Naveen Kumar, S and Bavikar, S. R and Sai Pavan Kumar, N. S and Ch.; Furay Yu, I and Chein, R, -J (2018) From carbamate to chalcone: Consecutive anionic Fries rearrangement, anionic Si→C alkyl rearrangement and Claisen-Schmidt condensation. Organic Letters, 20 (17). p. 5362. ISSN 1523-7060

Naveen kumar, T and Vikas, B and Rama Krishna, M and Jyothi, Y and Imran, Sk (2018) Development Of Composite Slabs Of Marble Powder Embedded Epoxy Resin. Materials Today: Proceedings, 5. pp. 13031-13035. ISSN 2214-7853

P

Payel, Ghosh and Rama Chandra, Pradhan and Sabyasachi, Mishra and Avinash Singh, Patel and Abhijit, Kar (2018) Physicochemical and nutritional characterization of jamun (Syzygium cuminii). Current Opinion in Food Science and Nutrition, 5 (1). pp. 25-35. ISSN 2347-467X

Prudhvi Krishna, M and Phani kireeti, M and Rama Krishna, M and Jyothi, Y and Ravi Krishna Swami, G (2018) Mechanical Properties of Fly Ash/ Sawdust Reinforced Epoxy Hybrid Composites. Materials Today: Proceedings, 5. pp. 13025-13030. ISSN 2214-7853

R

Rakesh Kumar, Sharma and Rashmi, Gaur and Manavi, Yadav and Anandarup, Goswami and Radek, Zbořil and Manoj B, Gawande (2018) An efcient copper-based magnetic nanocatalyst for the fxation of carbon dioxide at atmospheric pressure. Scientific Reports, 8 (1). p. 1901. ISSN 20452322

Rama Krishna, M and Tej Kumar, K Rakesh and Durga Sukumar, G (2018) Antireflection nanocomposite coating on PV panel to improve power at maximum power point. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 40 (20). pp. 2407-2414. ISSN 1556-7036

Rana, S. S and Pradhan, R. C and Mishra, S (2018) Variation in properties of tender jackfruit during different stages of maturit. Journal of food science and technology, 55. pp. 2122-2129. ISSN 0022-1155

Rao, B.J.M and Rao, K.V.N.S and Ranga Janardhana, G (2018) Hydrodynamic studies of rice husk Saw dust and ground nut shell fuels In a fluidized bed. International Journal of Mechanical Engineering and Technology, 9 (3). pp. 954-961. ISSN 0976-6359

Rao, Koya Prabhakara and Higuchi, Masakazu and Suryachandram, Jettiboina and Kitagawa, Susumu (2018) Temperature-Stable Compelled Composite Superhydrophobic Porous Coordination Polymers Achieved via an Unattainable de Novo Synthetic Method. Journal of the American Chemical Society, 140 (42). pp. 13786-13792. ISSN 0002-7863

Ratnam, C and Jasmin, N.M and Rao, V.V and Venkata Rao, K (2018) A Comparative Experimental Study on Fault Diagnosis of Rolling Element Bearing using Acoustic Emission and Soft Computing Techniques. Tribology in Industry, 40 (3). pp. 501-513. ISSN 0354-8996

S

Satayanarayana, Yatama and Rambabu, Gundlaa and Surender Singh, Jadava and Narayana reddy, Pedavenkatagaria and Jithendra, Chimakurthy and Namratha Rani, B and Thyagaraju, Kedam (2018) Focused library design and synthesis of 2-mercapto benzothiazole linked 1,2,4-oxadiazoles as COX-2/5-LOX inhibitors. Journal of Molecular Structure, 1159. pp. 193-204. ISSN 222860

Satyanarayana, Yatam and Surender Singh, Jadav and Rambabu, Gundla and Krishna Prasadh, Gundla and Gangireddy Madhusudhana, Reddy and Mohamed Jawed, Ahsan and Jithendra, Chimakurthy (2018) Design, Synthesis and Biological Evaluation of 2 (((5-aryl-1,2,4-oxadiazol-3-yl) methyl)thio)benzo[d]oxazoles: New Antiinflammatory and Antioxidant Agents. Chemistry select, 3 (37). pp. 10305-10310. ISSN 23656549

Sitaramanjaneya Reddy, Guntur and Manasa, M Hegde and Sampath Kumar, NS and Vijaya, R Dirisala (2018) In Vitro Studies of the Antimicrobial and Free-Radical Scavenging Potentials of Silver Nanoparticles Biosynthesized From the Extract of Desmostachya bipinnata. Analytical chemistry insights, 13. pp. 1-13. ISSN 1177-3901

Sreedhar Reddy, N and Prem Santhi, Y and Ramya Sree, K and Sai Kiran, K. Ch. S and Vishnu Vardhan, S (2018) Performance Testing and Evaluation of On-Farm Mobile Paddy Dryer. Current Journal of Applied Science and Technology, 28 (1). pp. 1-9. ISSN 2457-1024

Subhash, C and Rama Krishna, M and Sai Raj, M and Harsha Sai, B and Rama Rao, S (2018) Development of Granite Powder Reinforced Epoxy Composites. Materials Today: Proceedings, 5. pp. 13010-13014. ISSN 2214-7853

Subramanyam, M and Sreenivasulu, R and Gundla, R and Rao, M.V.B (2018) Synthesis, biological evaluation and docking studies of 1,3,4-oxadiazole fused benzothiazole derivatives for anticancer drugs. Letters in Drug Design and Discovery, 15 (12). pp. 1299-1307. ISSN 1570-1808

Sudheer Kumar, V and Nagaraju, CH and Venkatarao, K (2018) Modeling and charecterization of crack depth on rotor bearing using artificial neural networks. International Journal of Mechanical Engineering and Technology, 9 (3). pp. 813-827. ISSN 0976-6359

Surendar, A and Kishore, K.H and Kavitha, M and M.,, Ibatova and Samavatian, V (2018) Effects of Thermo-Mechanical Fatigue and Low Cycle Fatigue Interaction on Performance of Solder Joints. IEEE Transactions on Device and Materials Reliability, 18 (4). pp. 1-12. ISSN 1530-4388

Suresh, G and Vasu, V and Raghavendra, G (2018) Optimization of Input Parameters on Erosion Wear Rate of PTFE/HNT filled nanocomposites. Materials Today: Proceedings, 5. pp. 1462-1469. ISSN 2214-7853

V

V., Malapati, and K. K., Venkataratnam and R., Singh (2018) Structure and magnetic properties of Mn-Fe co-doped ZnO thin films deposited by Rfmagnetron sputtering. AIP Conference Proceedings, 1942. ISSN 1551-7616

Vaseem Chavhan, Md and Arunangshu, Mukhopadhyay (2018) THE DESIGN OF PERSONNEL PROTECTIVE CLOTHING FOR PROTECTION AGAINST CBRN AGENTS: A REVIEW. Filtration Solutions, 18 (2). pp. 98-117. ISSN 1479-0602

Venkata Rao, K (2018) Evaluation of welding characteristics using three-dimensional finite element simulation and experimentation for FSW of aluminum 6061. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40: 86.

Venkata Rao, K (2018) A Novel Approach for Minimization of Tool Vibration and Surface Roughness in Orthogonal Turn Milling of Silicon Bronze Alloy. Silicon. pp. 691-701.

Venkatarao, K and PBGSN, Murthy (2018) Modeling and optimization of tool vibration and surface roughness in boring of steel using RSM, ANN and SVM,. Journal of Intelligent Manufacturing, 29. pp. 1533-1543.

Venkatesh, B and Govardhanrao, Ch and Vaseem Chavhan, Md and Siva Jagadish Kumar, M (2018) An Investigation into comfort properties of polyester fabric by surface modification with polyvinyl alcohol. Textile trends, 12. pp. 29-34. ISSN 0049-5205

Vijay K, Singh and Chetan K, Hirwani and Subrata K, Panda and Trupti R, Mahapatra and Kulmani, Mehar (2018) Numerical and experimental nonlinear dynamic response reduction of smart composite curved structure using collocation and non-collocation configuration. Proc I MechE Part C: J Mechanical Engineering Science. pp. 1-19.

Vilas B, Gade and Anandarup, Goswami and Rajender S, Varma and Sharad N, Shelke and Manoj B, Gawande (2018) Iron Oxide-Cobalt Nanocatalyst for O-tert-Boc Protection and O-Arylation of Phenols. Nanomaterials, 8 (4). p. 246. ISSN 20794991

Vimal, Babu and Naga, Mani and Rama Krishna, M and Tejaswini, M (2018) Data Preprocessing for Modelling the audulteration detection in Gasoline with BIS. Materials Today: Proceedings, 5. pp. 4637-4645. ISSN 2214-7853

Vimalbau, U and Ramakrishna, M (2018) Modeling with multilayer perceptron for detection of fuel adulteration using python programming. journal of advanced research in dynamical & control systems, 10 (6). pp. 2123-2131.

Vinay Kumar, D and Farooq., Sk and Amarnatha, Reddy and Vamsi, Krishna (2018) Effect of velocity ratio of impinging turbulent jets on heat transfer characterstics of heat sink, International Journal of Mechanical Engineering and Technology. Journal of Mechanical Engineering and Technology, 9 (8). pp. 1093-1101. ISSN 0976-6359