Items where Division is "Department of Mechanical Engineering" and Year is 2021

A

A., Govindarajan and S. Jyothirmaye, Reddy and Kiran Kumar, Chandriah and T. Ch. Anil, Kumar and D., Balamurugan and G., Kannan (2021) Customer Satisfaction Post Car-Sales in Service Centers Using Experiential Marketing. BIOSCIENCE BIOTECHNOLOGY RESEARCH COMMUNICATIONS, 14 (6). pp. 328-334. ISSN 2321-4007

B

B Harish, Babu and K, VenkataRao and B Sathish, Ben (2021) Modeling and optimization of dead metal zone to reduce cutting forces in micro milling of hardened AISI D2 steel,. Journal of the Brazilian Society of Mechanical Sciences and Engineering,, 43 (142). ISSN 1678-5878

Balakrishna Reddy, K and Suresh, G and Nagarjuna, M (2021) Observations of human muscle response during daily life activities of biped kinematics using a musculoskeletal simulator. INCAS BULLETIN, 13 (13): 1. pp. 97-104. ISSN 2066-8201

F

Farooq, Shaik and Vinay Kumar, Domakonda (2021) Numerical Study on Natural Convection of Alumina-water Nanofluid in a Square Cavity with Two Localized Heat Sources on Adjacent Surfaces. Periodica Polytechnica Mechanical Engineering. ISSN 1587-379X

Feroz, SHAIK and M., RAMAKRISHNA and P. Dhaval, VARMA (2021) A Review on Fabrication of Thermoset Prepreg Composites using Out-of-Autoclave Technology. INCAS BULLETIN, 13 (2). pp. 133-149. ISSN 2066-8201

G

Gunturu, Bujjibabu and Vemulapalli Chittaranjan, das and Malkapuram, Ramakrishna and Konduru, Nagarjuna (2021) Development of Banana/Coir Natural Fibers Reinforced Polypropylene Hybrid Composites: The Effect of MA-g-PP (Maleic Anhydride Grafted Polypropylene) on Mechanical Properties and Thermal properties. Nano Hybrids and Composites, 32. pp. 85-97. ISSN 2297-3400

J

J. Thrisul, Kumar and C. L., Mounica and M. Satish, Kumar and D, Satyanarayana and MV, Raju (2021) SAR IMAGES CHANGE DETECTION BASED ON ADWT TECHNIQUE USING MFO ALGORITHM. Elementary Education Online, 20 (5). pp. 2389-2395. ISSN 1305-3515

Jinka, Ranganayakulu and P.V., Srihari and K Venkata, Rao (2021) AnOptimizationStrategytoImprovePerformanceinElectrochemical Discharge Machining of Borosilicate Glass Using Graph Theory Algorithm and Desirability Index. Silicon. ISSN 1876-9918

Jyothi, .Y and Akash, Ravuru (2021) Comparison of combustion, performance, energy and exergy characteristics of a diesel engine run on plastic and tire pyrolysis oil blends with diesel. International Journal of Ambient Energy. pp. 4539-4554.

K

K., Arunkarthikeyan and K., Balamurugan (2021) Experimental Studies on Deep Cryo Treated Plus Tempered Tungsten Carbide Inserts in Turning Operation. Advances in Industrial Automation and Smart Manufacturing. pp. 313-323. ISSN 2195-4356

K., Arunkarthikeyan and K., Balamurugan (2021) Studies on the impact of soaking time on a cryogenic processed and post tempered WC-Co insert. Materials Today: Proceedings, 44 (1). pp. 1687-1691. ISSN 2214-7853

K., Balamurugan and M. Venkata, Pavan and S.K. Ahamad, Ali and G., Kalusuraman (2021) Compression and flexural study on PLA-Cu composite filament using FDM. Materials Today: Proceedings, 44 (1). pp. 1687-1691. ISSN 2214-7853

K., VenkataRao and Yekula Prasanna, Kumar and ijay Kumar, Singh and Lam, Suvrna and Jinka, Ranganayakulu (2021) Vibration-based tool condition monitoring in milling of Ti-6Al-4V using an optimization model of GM(1,N) and SVM. The International Journal of Advanced Manufacturing Technology, 115. pp. 1931-1941. ISSN 1433-3015

K.Mangapathi, Rao and D.Vinay, Kumar and K.Chandra, Shekar and B., Singarvel (2021) Optimization Of EDM Process Parameters Using TOPSIS For Machining AISI D2 Steel Material. Materials Today: Proceedings. pp. 68-75. ISSN 2214-7853

K.Mangapathi, Rao and D.Vinay, Kumar and K.Chandra, Shekar and R.Ranjith, Kumar (2021) Investigation and analysis of EDM process – a new approach with Al2O3 nano powder mixed in sunflower oil. IOP Conference Series: Materials Science and Engineering, 1057. ISSN 1757-899X

Kaki Venkata, Rao and Yekula Prasanna, Kumar and Vijay Kumar, singh and Balla Srinivasa, Prasad (2021) Online modeling and monitoring of power consumption, aerosol emissions and surface roughness in wire cut electric discharge machining of Ti-6Al-4V. The International Journal of Advanced Manufacturing Technology, 32. pp. 85-97. ISSN 1433-3015 (Submitted)

L

L. Suvarna, Rajua and B., Singaravel (2021) Micro Textured Cutting Inserts with Solid Lubrication as Alternative Coolant to Mineral Oil-Based Cutting Fluid in Turning Operation. International Journal of Vehicle Structures & Systems, 13 (4). pp. 536-540. ISSN 0975-3540

L. Suvarna, Rajua and B., Singaravel and Ch., Divya (2021) Experimental investigation of different cutting conditions in turning of Inconel 718. IOP Conference Series: Materials Science and Engineering, 1057. pp. 1-9. ISSN 1757-899X

M

M Venkata, Pavan and K, Balamurugan and V, Srinivasadesikan and L, Shyi-Long (2021) Impact and Shear behavior of PLA/12%Cu reinforced composite filament printed at different FDM conditions. Arabian Journal of Science and Technology, 46. pp. 12709-12720. ISSN 2193-567X

M., Sathya and K., Gunalan and Manohar, B and T CH Anil, Kumar and Shaik, Shafi and G, Johncy (2021) An intellectual procurement innovation of smart grid power system with wireless communication networks based on machine learning. International Journal of Nonlinear Analysis and Applications, 12 (2). pp. 1567-1576. ISSN 2008-6822

M., Venkataiah and T. Anup, Kumar and K. Venkata, Rao and S. Anand, Kumar and Ravikuam, Dumpala and B. Ratna, Sunil (2021) Investigation on the role of microstructure and temperature on tribological characteristics of fine-grained ZE41 Mg alloy. TRIBOLOGY - MATERIALS, SURFACES & INTERFACES. pp. 68-75.

M. Chaitanya, Reddy and K., VenkataRao and Gamini, Suresh (2021) An experimental investigation and optimization of energy consumption and surface defects in wire cut electric discharge machining,. Journal of Alloys and Compounds, 8515. ISSN 1873-4669

M.Venkata, Pavan and K., Balamurugan and P, Balamurgan (2021) Wear experiments on PLA-Cu composite filament printed in different FDM conditions. Turkish Journal of Computer and Mathematic Education, 12 (9). pp. 2245-2251. ISSN 1309-4653

N

N Bharath, Kumar and T Ch Anil, Kumar and Haqqani, Arshad and DSNMRAO, A (2021) Design And Analysis Of Different Multi-Level Inverter Topologies For Single Phase Im Drive. Turkish Journal of Computer and Mathematic Education, 12 (10). pp. 4104-4117. ISSN 1309-4653

Nagarjuna, Maguluri and Gamini, Suresh and K Venkata, Rao (2021) Assessing the effect of FDM processing parameters on mechanical properties of PLA parts using Taguchi method. Journal of Thermoplastic Composite Materials. ISSN 1530-7980 (Submitted)

P

Phaneendra Kumar, Kopparthi and Vengal Rao, Kundavarapu and Venkata Rao, Kaki and Bhaskara Rao, Pathakokila (2021) Modeling and multi response optimization of mechanical properties for E-glass/polyester composite using Taguchi-grey relational analysis. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 235 (2). pp. 342-350. ISSN 2041-3009

Pruthviraju, Garikapati and K., Balamurugan and T. P., Latchoumi and Ramakrishna, Malkapuram (2021) A Cluster-Profile Comparative Study on Machining AlSi7/63% of SiC Hybrid Composite Using Agglomerative Hierarchical Clustering and K-Means. Silicon, 13. pp. 961-972. ISSN 1876-990X

R

Ramakrishna, Malkapuram and S., Devaraj and B., Singaravel (2021) Performance analysis of micro textured cutting insert design parameters on machining of Al-MMC in turning process. International Journal of Lightweight Materials and Manufacture, 4. pp. 210-217. ISSN 2588-8404

S

Shanmugam, V. and Pavan, M.V and Babu, K and Karnan, B (2021) Fused deposition modeling based polymeric materials and their performance: A review. Polymer Composites, 42 (11). pp. 5656-5677. ISSN 1478-2391

V

V Umasai Vara, Prasad and K Venkata, Rao and PBGSN, Murthy (2021) Mechanistic Models for prediction of cutting forces and power consumption considering chip Geometry. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 235 (2). pp. 479-488. ISSN 2041-3009

Venkata Rao, K (2021) The use of teaching-learning based optimization technique for optimizing weld bead geometry as well as power consumption in additive manufacturing. Journal of Cleaner Production, 279. ISSN 1879-1786

Vijay K., Singh and Jeeoot, Singh and K. Venkata, Rao and N K., Singh and Ch, Saran and M, Paswan and Subrata K., Panda and Vivek, Chaudhary (2021) Elastic behavior control of smart material integrated shallow spherical composite panel using HOSDT kinematics, Composite structures. Composite structures, 260. ISSN 1879-1085