Items where Division is "Department of Mechanical Engineering" and Year is 2020

B

B. J. M., Rao and K.V. N. S., Rao (2020) CFD Studies Of Mixing Behavior Of Inert Sand With Biomass In Fluidized Bed. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 597-607. ISSN 2454 -7190

B. Nagaeswara, Rao and Juluru Pavanu, Sai (2020) Heat Transfer Enhancement Of A Triplex Concentric Tube During Energy Storage By Using Pcm. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 559-565. ISSN 2454 -7190

B. Nageswara, Rao and K. Pavan Kumar, Reddy and M. Srinivasa, Reddy and T., Sreedhar (2020) Analyzing The Thermal Performance Of A Pcm Material Utilized In Buildings. Journal of Mechanics of Continua and Mathematical Sciences (15): 7. pp. 551-558. ISSN 2454 -7190

B.Nageswara, Rao and J Pavanu, sai (2020) Efficiency and economic optimization of shell and tube heat exchanger using bacteria foraging algorithm. SN Applied Sciences, 2 (13). ISSN 2523-3971

Balamurugan, K and Arunkarthikeyan, K and Rao, P.M.V (2020) Studies on cryogenically treated WC-Co insert at different soaking conditions. Materials and Manufacturing Processes, 35 (5). pp. 545-555.

Bhavya Swathi, I and Suvarna Raju, L and Perumalla Janaki, Ramulu (2020) Surface development by reinforcing nano-composites during friction stir processing – a review. Journal of Engineering, Design and Technology, 18 (3). pp. 653-687. ISSN 1726-0531

Borigorla, Venu and L Suvarna, Raju and K Venkata, Rao (2020) Multiobjective optimization of friction stir weldments of AA2014-T651 by teaching–learning-based optimization. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234 (6). pp. 1146-1155. ISSN 2041-2983

D

D, Satyanarayana and Sriramireddy., K and P.S.R., Gopalasetti and Ravikumar, Mandava (2020) Reduction In Emission Of Harmful Gases From Ic Engine By Electrolysis. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 566-577. ISSN 2454 -7190

D. Brahmeswara, Rao and M., Balaji and P.B.G.S.N., Murthy and K. Venkata, Rao (2020) An Optimization Strategy To Reduce Surface Roughness, Flank Wear And Tool Vibration In Micro Milling Of TI-6AL-4V Alloy. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 529-539. ISSN 2454 -7190

D. Vinay, Kumar and G. Samhita, Priyadarsini and V. Jagadeesh, Babu and Y. Sai Varun, Teja (2020) Performance And Emission Characteristics Of Gasoline-Ethanol Blends On Pfi-Si Engine. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 578-586. ISSN 2454 -7190

DhanaRaju, V and Harish, Venu and Lingesan, Subramani and P.S., Kishored and L., Prasanna and D. Vinay, Kumare (2020) An experimental assessment of prospective oxygenated additives on the diverse characteristics of diesel engine powered with waste tamarind biodiesel. Energy, 203. p. 117821. ISSN 1873-6785

Divya, Ch and Suvarna, Raju and Singaravel., B (2020) Effect Of Various Solid Lubricants On Surface Quality In Turning Of Inconel 718. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 49-506. ISSN 2454 -7190

E

E. Siva, Krishna and Gamini, Suresh and M, Nagarjuna (2020) A Literature Review on the Extensive Study of Multi-functional Self-healing Polymer Composites (SHPC). Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 648-660. ISSN 2454 -7190

F

Farooq, Sk and D. Vinay, Kumar (2020) Experimental Evaluation of AN SI Engine Using E10 Equialent Ternary Gasoline-Alchohol Blends. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 638-647. ISSN 2454 -7190

G

GAYATRI, U and G Srinivasa, Rao and M, Ramakrishna (2020) Mechanical and thermal characterization of chickenRaches/sawdust reinforced hdpe hybrid composites. International Journal of Mechanical and Production Engineering Research and Development, 10 (1). pp. 327-344. ISSN 2249–8001

Gamini, Suresh and Emani. Siva, Krishna (2020) Influence Of Nano Clay On Mechanical And Morphological Properties Of Sisal/Banana Fiber Reinforced Composites. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 443-452. ISSN 2454 -7190

Gamini, Suresh and K. Balakrishna, Reddy and M., Nagarjuna (2020) Simulation Of Shank-Foot 2-Dof Manipulator With Computed Torque Control For Trajectory Generation. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 416-425. ISSN 2454 -7190

Gamini, Suresh and Lakshmi Srinivas, Ch and M Chandra, Sekha (2020) Investigation of the effect of micro-fillers on Viscoelastic and Erosion wear Characteristics of PTFE composites. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 696-703. ISSN 2454 -7190

Gamini, Suresh and Nagarjuna, Maguluri and Kunchala, Balakrishna (2020) Characterization Of Materials For Customized Afo Using Additive Manufacturing. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 587-596. ISSN 2454 -7190

Govindarajulu, E and Sai Rakesh, S (2020) Reliability, Availability and Maintainability Analysis for Transportation Vehicles—A Case Study in APSRTC. Advances in Materials and Manufacturing Engineering. Lecture Notes in Mechanical Engineering. pp. 457-467. ISSN 2195-4356

Govindarajulu, Eedara and P. N. Manthru, Naik (2020) Design Optimization of Drive Shaft For An Automobile Application. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 626-637. ISSN 2454 -7190

H

Hepsibah, Palivela and B., Ravali and M.V., Raju and K.Maria, Das and T.Ch.Anil, Kumar (2020) Quality Characteristics of Ground Waters in Few Sources of Industrial Zone. International Journal of Innovative Technology and Exploring Engineering, 9 (3). pp. 1134-1137. ISSN 2278-3075

J

Jinka, Ranganayakulu and PV, Srihari and K Venkata, Rao (2020) An optimization strategy to improve performance in electrochemical discharge machining of borosilicate glass using graph theory algorithm and desirability index. Silicon, 14. pp. 5241-5254. ISSN 1876-990X

Jyothhi, Yarlagadda and Dr.Ramakrishna, Malkapuram (2020) Influence of MWCNTs on the MechanicalProperties of Continuous Carbon EpoxyComposites. Journal of Composite and Advanced Materials (RCMA), 30 (1). pp. 35-41. ISSN 1958-5799

K

K., Arunkarthikeyan and A. Chinnamahammad, Bhasha and M. Venkata, pavan and pavan, S and Shaik., Abrar (2020) A Novel Work Table Design For Turning In Abrasive Water Jet Machine. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 453-460. ISSN 2454 -7190

L

L. Suvarna, Raju and N., Ramakrishna and G., Mallaiah (2020) Effect Of Sic And Tib2 Particles On Microstructure And Mechanical Properties Of Copper Surface Composites Fabricated By Friction Stir Processing. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 507-516. ISSN 2454 -7190

Lam Suvarna, Raju and Venu, Borigorla (2020) Multi Objective Optimization Of Fsw Process Parameters Using Genetic Algorithm And Tlbo Algorithm. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 480-494. ISSN 2454 -7190

M

M. Satish, Kumar and Ambati Dattatreya, Kumar and Hepsibah, Palivela and M. V., Raju and T. Ch. Anil, Kumar (2020) Hydrological Modelling of Catchments at Industrial Sector. International Journal of Engineering and Advanced Technology, 9 (3). pp. 1366-1369. ISSN 2249 – 8958

M. Satish, Kumar and Ambati Dattatreya, Kumar and M. V., Raju and K. Maria, Das and D., Satyanarayana (2020) Exploration of Groundwater Quality to Promote Sustainable Environment. International Journal of Recent Technology and Engineering, 8 (6). pp. 2012-2015. ISSN 2277-3878

M. V., Raju and K. Maria, Das and M. Satish, Kumar and D., Satyanarayana and Cyril Lucy, Monica (2020) Rapid Environmental Impact Assessment of Lake Water. International Journal of Advanced Science and Technology, 29 (3). pp. 8468-8478. ISSN 2005-4238

M.Satish, Kumar and M.V., Raju and K.Maria, Das and T.Ch. Anil, Kumar and D., Satyanarayana (2020) Green Engineering Strategies on Solid Waste Management to Promote Urban Environmental Sustainability. International Journal of Advanced Science and Technology, 29 (5). pp. 4638-4648. ISSN 2005-4238

Mihir, Barman and Gamini, Suresh and Kondeti, Sravanth and Nandure Narayan, Rao (2020) Critical Speed Analysis of Rotor Shafts Using Campbell Diagrams. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 675-683. ISSN 2454 -7190

N

N. B. Prakash, Tiruveedula and T.CH. Anil, Kumar and Pagidi, Madhukar and Balasubramanian, Ravisankar and S., Kumaran (2020) Effect of back pressure and temperature on the densification behaviour of Al-Mg alloy. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 684-695. ISSN 2454 -7190

Nagarjuna, Maguluri and Gamini, Suresh and Kunchala, Balakrishna and Emani, Sivakrishna (2020) A Review on the Development of Customized Ankle Foot Orthosis for Foot Drop using Additive Manufacturing Processes. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 661-674. ISSN 2454 -7190

P

P., Sneha and Chinnamahammad, Bhasha and Deepthi., T and Arun, Karthikeyan (2020) A Study On Abrasive Water Jet Machining Using ANOVA On D3 Tool Steel. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 461-471. ISSN 2454 -7190

P. Satish, Kumar and L. Suvarna, Raju and M. Ravi, Kumar and L. Siva Rama, Krishna (2020) A Study Of Hardness And Microstructure Of A Robot Deposited Waam Component With Varying Wire Feed Rate In The Build Direction. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 517-528. ISSN 2454 -7190

Phaneendra Kumar, Kopparthi and Kiran Kumar Yadav, Aerra and Srikar, Gemaraju and Bhaskara Rao a, Pathakokil and Suresh, Gamini (2020) Tensile And Flexural Properties Of Delaminated Woven E-Glass/Epoxy Composites. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 436-442. ISSN 2454 -7190

Phaneendra Kumar, Kopparthi and Vengal Rao, Kundavarapu and Venkata Ravishankar, Dasari and Venkata Rao, Kaki and Bhaskara Rao, Pathakokila (2020) Modeling of glass fiber reinforced composites for optimal mechanical properties using teaching learning based optimization and artificial neural networks. SN Applied Sciences, 2 (131). ISSN 2523-3971

Priyaranjan, Samal and Ravi Kumar, Mandava and Pandu R., Vundavilli (2020) Dry sliding wear behavior of Al 6082 metal matrix composites reinforced with red mud particles. SN Applied Sciences, 2 (313). ISSN 2523-3971

R

Ratna Raju, Lam and V. V., Kondaiah and Y., Naidubabu and Ravikumar, Dumpala and B.Ratna, Sunil (2020) Effect of Crack Angle on Stress Shielding in Bone and Orthopedic Fixing Plate Implant: Design and Simulation. Advances in Mechanical Engineering, Lecture Notes in Mechanical Engineering, https://doi.org/10.1007/978-981-15-3639-7_94. ISSN 2195-4356

Ravi Krishna Swami, Garigipati and Ramakrishna, Malkapuram (2020) Characterization of novel composites from polybenzoxazine and granite powder. SN Applied Sciences, 2 (1545). ISSN 2523-3971

Ravi Kumar, Mandava and Pandu Vundavilli, R (2020) An adaptive PID control algorithm for the two-legged robot walking on a slope. Neural Computing and Applications, 32. pp. 407-3421. ISSN 1433-3058

S

Shaik, Feroz and Dhaval Varma, P and M., Ramakrishna (2020) Reverse Engineering: Generation of Cad Model from Scanned Mesh File Captured using 3d Scanner. International Journal of Engineering Research & Technology, 9 (5). pp. 1276-1281. ISSN 2278-0181

Sharif,, S.K and Nageswara, Rao and Jagadish,, D (2020) Comparative performance and emission studies of the CI engine with Nodularia Spumigena microalgae biodiesel versus different vegetable oil derived biodiesel. SN Applied Sciences, 2 (858). ISSN 2523-3971

Srikar, Gemaraju and Kiran Kumar Yadav, Aerra and Suresh, Gamini and Phaneendra Kumar, Kopparthi and Bhaskara Rao, Pathakokila (2020) A Review On Surface Displacements And Strains Using Digital Image Correlation Techniques. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 426-435. ISSN 2454 -7190

Sriramireddy, K and D., Satyanarayana and Ravikumar, Mandava (2020) An Investigation on Bore-well Rescue Robot–Present Devices and Techniques. International Journal on Emerging Technologies, 11 (1). pp. 358-363. ISSN 2249-3255

T

Thirumala Vasu, Aradhyula and Da, Bian and A. Babul, Reddy and Yeau-Ren, Jeng and Murthy Chavali,, E and Sadiku, R (2020) Compounding and the mechanical properties of catla fish scales reinforced-polypropylene composite–from biowaste to biomaterial. Advanced Composite Materials, 29 (2). pp. 115-128. ISSN 0924-3046

V

V. Uma Sai Vara, Prasad and K. Venkata, Rao and Ch., Nagraju and M., Venu and M., Venkataiah (2020) Experimental Surface Quality Estimation In Ultrasonic Vibration Assisted Helical Milling. Journal of Mechanics of Continua and Mathematical Sciences, 15 (7). pp. 472-479. ISSN 2454 -7190

V.Uma Sai Vara, Prasad and K.Venkata, Rao and M., Balaji and D.Brahmeswara, Rao (2020) FEA investigation of process parameters effect on machining characteristics in helical milling. Materials Todat: Proceedings, 23 (3). pp. 590-593. ISSN 2214-7853

Venkata Rao, K (2020) The use of teaching-learning based optimization technique for optimizing weld bead geometry as well as power consumption in additive manufacturing. Journal of Cleaner Production, 279. ISSN 1879-1786

VenkataRao, K and Ratna Raju, L and Ch. Kiran, Kumar (2020) Modeling of kerf width and surface roughness in Wire cut EDM of Ti-6Al-4V. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 234 (6). pp. 533-542. ISSN 2041-3009